Frequently Asked Questions
How to remove Enter when we are scanning barcode?
Last Updated 2 years ago
Please refer to the Prefix/Suffix Code function in the user manual.
By default, an [Enter] or [CR] character is set as the suffix code.
You can disable the function via following steps:
1. Enter Setup
2. Configure Suffix
3. Finish suffix setting
4. Finish scanner setting
By default, an [Enter] or [CR] character is set as the suffix code.
You can disable the function via following steps:
1. Enter Setup
2. Configure Suffix
3. Finish suffix setting
4. Finish scanner setting