Frequently Asked Questions
[18xx] How to change BT connection mode by using EZsuite and Command line?
Last Updated 2 years ago
Via 1800 EZsuite
1. Please download our 18xx EZ suite from GoBetween and install it.
2. Turn on 1862 and launch EZConfig on your PC.Press connect once you connect 1862 to PC via USB cable
3. Select Communication Interface, and you can select the interface you want.
4. And press this button to update your setting to 18xx terminal.
Via commend line
1. Please make sure your have connected with 18xx terminal by Hyper Terminal
utility or other utility.
2. Now, you can begin to issue commands between the host computer and RFID Reader. For example, you can issue “#@sys_info?” command for testing. If the connection is successful, the HyperTerminal will display the following response from the reader.
3. [BT connection mode]
#@bt_type?
This command can check your BT connection type
#@bt_type=[m]\r
This command can set your 1862 Bluetooth connection type.
The default of 18xx is 0
1. Please download our 18xx EZ suite from GoBetween and install it.
2. Turn on 1862 and launch EZConfig on your PC.Press connect once you connect 1862 to PC via USB cable
3. Select Communication Interface, and you can select the interface you want.
4. And press this button to update your setting to 18xx terminal.
Via commend line
1. Please make sure your have connected with 18xx terminal by Hyper Terminal
utility or other utility.
2. Now, you can begin to issue commands between the host computer and RFID Reader. For example, you can issue “#@sys_info?” command for testing. If the connection is successful, the HyperTerminal will display the following response from the reader.
3. [BT connection mode]
#@bt_type?
This command can check your BT connection type
#@bt_type=[m]\r
This command can set your 1862 Bluetooth connection type.
The default of 18xx is 0