常见的问题
How to load .AGX (AG Template) to 8 series terminal?
最后更新 2 years ago
Please refer to the instruction below to load .AGX file to an 8 series terminal.
1. First, the terminal needs to load AG runtime. Please refer to the instruction.
2. Press Power key to turn the terminal.
2. Please select “3. Utilities"
3. Please select "1. Program Settings".
4. Please select "2. DL Program Interface".
5. Please press ESC 2 times to find the "6. Load Application" and select it.
4. Connect the terminal to PC via cable or cradle.
5. Please execute ForgeAG.exe or AG_Load.exe (in utilities folder) on PC.
6. If you use ForgeAG.exe, please select "Transfer" and "Load Application"
6. Please set interface parameters.
7. Click OK to load the .AGX file (AG Template).
1. First, the terminal needs to load AG runtime. Please refer to the instruction.
2. Press Power key to turn the terminal.
2. Please select “3. Utilities"
3. Please select "1. Program Settings".
4. Please select "2. DL Program Interface".
5. Please press ESC 2 times to find the "6. Load Application" and select it.
4. Connect the terminal to PC via cable or cradle.
5. Please execute ForgeAG.exe or AG_Load.exe (in utilities folder) on PC.
6. If you use ForgeAG.exe, please select "Transfer" and "Load Application"
6. Please set interface parameters.
7. Click OK to load the .AGX file (AG Template).