Frequently Asked Questions
How to auto-aply Wi-Fi certificate by scanning barcode with ADC
Last Updated 2 years ago
Auto-apply Wi-Fi certificate file SOP
1. Prepare Wi-Fi information and certificate, including Wi-Fi access point, certificate file, certificate identity and certificate password.
2.Open ADC>Wi-Fi Settings. Fill in Wi-Fi information.
Please refer to the example below:
Wi-Fi Access Point : 1aa5
Certificate File: chuying_CA.PFX,
Certificate Identity: CIPHERLAB\chuying.wang
Certificate Password: 23058518
PS. Key “/” in Destination Path means saving certificate in /sdcard.
3.Click Create 2D Barcode icon above
4.Turn on the Wi-Fi Setting, then click Create PDF File icon.
5. 2D barcode will be created and pop up with sequence number.
Please refer to the example below:
6. Confirm Device’s BarcodeToSetting version is V 1.0.23. Scan the 2D barcodes.
Total: total number of QR code needs to be scanned.
Remaining: remain number of QR code needs to be scanned.
Next: next sequence number should be scanned.
Result: will show up “Success” when scanning was completed.
7. Once the scanning completed, Wi-Fi Certification AP will connect in a short time.
1. Prepare Wi-Fi information and certificate, including Wi-Fi access point, certificate file, certificate identity and certificate password.
2.Open ADC>Wi-Fi Settings. Fill in Wi-Fi information.
Please refer to the example below:
Wi-Fi Access Point : 1aa5
Certificate File: chuying_CA.PFX,
Certificate Identity: CIPHERLAB\chuying.wang
Certificate Password: 23058518
PS. Key “/” in Destination Path means saving certificate in /sdcard.
3.Click Create 2D Barcode icon above
4.Turn on the Wi-Fi Setting, then click Create PDF File icon.
5. 2D barcode will be created and pop up with sequence number.
Please refer to the example below:
6. Confirm Device’s BarcodeToSetting version is V 1.0.23. Scan the 2D barcodes.
Total: total number of QR code needs to be scanned.
Remaining: remain number of QR code needs to be scanned.
Next: next sequence number should be scanned.
Result: will show up “Success” when scanning was completed.
7. Once the scanning completed, Wi-Fi Certification AP will connect in a short time.