常见的问题

How to do Wi-Fi echo test on 8 series terminals?
最后更新 2 years ago

  • On PC (Server) site:
  1. Open the echo test program
  2. Select the setting as [TCP/IP - Server]
  3. Check the information of the Local IP and port
  4. Click [Start] to enable the echo test

image

  • On 8series Terminal site:
  1. Press [7] + [9] + [Power] to enter【System Menu】.
  2. Select 【Wi-Fi Menu】.
  3. Select 【Network Setting】.
  4. If you use DHCP to get IP Address, please make sure Local IP Address, SubNet Mask, DNS Server IP and Default Gateway have been set 0.0.0.0.
  5. If you use Static IP, please input the proper Local IP Address, SubNet Mask, DNS Server IP and Default Gateway.
  6. Select【WLAN Setting】input the AP's SSID.
  7. Select【Security】input the security setting and passcode for Wi-Fi connection.
  8. Select【Echo Tests】Select 【Client Mode】
  9. Input the server IP,Ex: 192.168.6.44
  10. Input the server port,Ex:1024
  11. After the terminal connect to the W-Fi AP, you should see the prompt on the screen
Echo Test
=============== Ready Any key to start=================

12. You can press ENTER key to start the Echo Test.

请稍候!

请稍候...它将需要一点时间 !