Frequently Asked Question
How to perform battery swapping on CipherLab Terminal devices.
Last Updated 3 months ago
In CipherLab Terminal Devices, Battery Swap mode is designed to recover your system and operation status quickly and harmlessly when exchanging battery.
Please follow below steps to operate your devices.
1.Short press the power key and choose “Battery Swap” option.
2.Press OK to start the battery swap process. The red LED will light up when device haven’t been ready for it, please remove the battery after the light has gone.
3. After replace the battery, please press the power key again, and the system should recover the status within seconds.
Please note the backup battery is limited, it's suggest to complete the battery swapping within 1 minutes. otherwise the device will power off automatically.