Frequently Asked Question
How to update Bluetooth Scanner firmware via Bluetooth SPP?
Last Updated 3 months ago
Once CipherLab has released the new firmware, you will be able to download it
from GoBetween.
CipherLab Bluetooth scanners support the standard SPP Profile. Please
follow the instructions below to update firmware for CipherLab scanners via SPP.
1. Scan barcodes below in sequence to set the scanner in SPP mode.
2. Proceed with Bluetooth searching and pairing from PC or laptop.
3. Please check and confirm that COM Port has been generated in Device Manager.
4. Please scan barcodes below to set the scanner to download mode.
5. When the scanner starts beeping, please open Progload.exe on PC and specify the
COM Port Number, Baud Rate and locate the SHX firmware file; then click OK to load
firmware.