Scanner Series 1 & 2
Scanner Series 1 & 2
Frequently Asked Questions
- 1500P/1560P decoding area adjustment
- Can I change my 1504B or 1504P scanner cable to the other interface?
- Does 1861 or 1862 support Window and Android SDK?
- Does 1862 support Android?
- Fail to pair 1560P/1564A with 3656.
- How to add Application ID or Separator when we scanned GS1-Barcode?
- How to avoid the data missing on MAC OS platform?
- How to check if IR calibration on 22xx scanner had been done ?
- How to connect 1664 to devices without using PIN code?
- How to enable Italian Pharmacode on 2D readers?
- How to install 1023setup_400 utility on Windows 10 32bit?
- How to issue serial commands via USB connection and set power level?
- How to recover the S/N of the 3656 base when the S/N sticker is missing?
- How to remove Enter when we are scanning barcode?
- How to remove first 2 zeros in UPC-A/EAN13 barcode?
- How to set character substitution by using ScanMaster?
- How to set CipherLab Bluetooth Scanner Auto Power Off and Bluetooth Power Saving by using CipherLab ScanMaster?
- How to set the suffix for the 2500 series using ScanMaster (using F12 as an example)
- How to set up 1862's communication interface through 1800EZConfig?
- How to set up Multi-Barcode editor
- How to solve 3656 Cradle communication LED flash red color issue?
- How to solve missing data or incorrect data problem when scanning barcodes?
- How to trigger the serial command (tethered scanners)
- How to update 22xx scanner firmware?
- How to update Bluetooth Scanner firmware via Bluetooth SPP?
- How to update Bluetooth Scanner firmware via CipherLab Bluetooth Transponder?
- How to update Wired Scanner firmware via USB cable?
- How to upgrade CipherLab Bluetooth Scanner Firmware which comes with CipherLab Bluetooth Transponder?
- How to upgrade CipherLab Bluetooth Transponder Firmware?
- How to upgrade CipherLab Corded Scanner Firmware?
- Instructions for updating CipherLab 3610 dongle
- Low light enhancement at presentation mode
- Troubleshoot yellow exclamation mark in Device Manager.
- Use 1564A output data at Microsoft Excel of iPad, the Barcode content will miss.
- Why is it difficult using my 2D scanner to read a barcode on LCD screen?
- Why the Virtual Serial Port (VCOM) on CipherLab 3656 (Bluetooth Transponder) refreshes continuously, and the PC cannot receive the data?
- Why there's no pairing dialog when I am connecting Android device to the 1862 through Bluetooth?
- Why using scanner get wrong Thai character data output on computer
- [1070] How to connect 1070 to Mac with VCOM profile?*
- [1500/1502] How to trigger the serial command*
- [1500] How to add [PageDown] into suffix Q&A by ScanMaster?*
- [1500] When using 1500P with an RS-232 cable, there is a scanning beep when the scanner reads a barcode, but no data shows up on the PC.*
- [1504 / 1564 / 1664] Why my 2D scanner is difficult to read a barcode on LCD screen?*
- [1504] 1504 cannot transmit data to text editor with Cipher2DKey (v1.003).*
- [1504] 1504SE has difficulty reading the same EAN 13 barcode repeatedly under Presentation scanning mode.*
- [1504] How to set up Multicode configuration*
- [1504] Low light enhancement at presentation mode
- [150x/156x] Can I put 156x on 150x’s stand or put 150x on 156x’s stand?*
- [150x/166x/250x/256x] How to add the control characters in the QR code and barcode?
- [155x/166x] How to get 3656’ serial number if it lost the serial sticker?*
- [1560x/166x] Can 156x / 166x output data in alphabet and numeric on Android devices or IOS devices, but input method is set as Pinyin or other input methods?*
- [1560] 1560 has difficulty reading barcodes, needs to adjust to a short DOF to decode successfully.*
- [1564/3656] How to check 1564/3656 firmware version – USB VCOM via 3656*
- [156x/1660/1661] How to connect to iPhone/iPad via BT HID?
- [156x/166x] Why 156x / 166x cannot connect with 3656 or 3619 but not output data to host?*
- [18xx] Why can't I press the the button on EZConfig?
- [2200&2504] How to set the Prefix/ Suffix Code rules
- [2200] How to scan Chinese QRcode
- [Scanner Series 1&2 ]How to use a scanner to scan Function Keys?(ex: ESC,F1~F12 etc.)