Frequently Asked Question

USB CDC VCOM Support Verification with 2564SR
最後更新 2 months ago

Debian 11 supports USB CDC VCOM devices, and testing confirms that scanner data can be transmitted normally.
Validation steps are as follows:

  • Set the 256x Cradle interface to USB CDC VCOM
  • Run ls /dev/ttyACM* in the Debian Terminal, if there is only one USB VCOM it will show /dev/ttyACM0
  • Run sudo cat /dev/ttyACM0

Scan a barcode with the 2564SR and the data will be continuously transmitted to the Debian Terminal

請稍後!

請稍後幾分鐘!